Mammoth Clovis fluted on side 2

Here is the other side of the mammoth clovis which was fluted today. Bill wasn't satisfied with the flute because it only ran about 2 inches. We have a video of the fluting on our YouTube channel.

 

Here is a picture of the platform.

Please visit www.modern-flintknappers.com

Mammoth Clovis with flute platform

Below is a 11 inch long 4 inch wide Clovis with a 3 1/2 inch flute. The other picture shows the platform for the flute. This flute was done by percussion.We are considering fluting the other side, what do yall think, should we go for it?

Type 1C Danish Dagger

Back in 2009 I posted about Greg Nunn's Edge to Edge flaking. After viewing Greg's video Bill also made some edge to edge pieces at that time.Since then Bill made a Type 1C Danish dagger with edge to edge flaking, below is a picture. This blade is around 7 inches long.

You can also see a video of this blade at   http://www.youtube.com/watch?v=AFyUlvqDcD4